Get ready for work—you must wear:

• a work shirt and pants,
• work shoes with composite toe caps,
• work gloves. 

Before you start work, remember that you must:

• Complete health and safety training and on-the-job training.
• Have no health contraindications to performing the work.
• Be familiar with the operating instructions for the machines and equipment used at your workplace.

Before starting the press container:

• Prepare the waste you want to dispose of in the chute.
• Check that the chute structure is not damaged.
• Make sure that the materials you want to dispose of are not too large.
• Check that the guards are in place.

During operation:

• If the green LED is lit, you can start working. 
• When disposing of waste, make sure that none of your clothing is caught on the waste being disposed of. 
• When disposing of waste into the chute, do not lean over the railing or the chute inlet.

After finishing work:

• Close the chute opening.
• Clean up the work area. 
• Make sure that the chute area is secured so that it does not pose a threat to the surroundings.

What should you NOT do?

• Dispose of waste that is too large. 
• Dispose of waste when the red LED is lit.
• Enter the chute. 
• Throw pallets and other warehouse equipment into the chute. 
• Allow untrained persons to work.
• Repair the chute yourself.

Failure or accident?

• If something breaks down, secure the chute against further use and report the fault to your supervisor.
• If an accident has occurred, do not touch anything and inform your supervisor.
• Hang a sign on the damaged chute saying: "CHUTE UNDER REPAIR – DO NOT USE."