Get ready for work—you must wear:

• a helmet,
• knee, elbow, and wrist pads,
• sturdy, closed-toe shoes.

Before using the scooter, remember that you must:

Complete health and safety training and on-the-job training.

Have no health contraindications to performing the work.

Be familiar with the scooter's operating instructions.

Route:

Office building no. 4 -> Main office building 

Main Office Building -> Office Building No. 4

    Fig. 1. Communication route for traveling by scooter.

• Do not use the scooter outside the designated route.

Before riding:

• Check the technical condition of the scooter (brakes, screws, mechanisms).
• Contact the Technical Department if you have any doubts.
• Report any faults immediately. 

While riding:

• Keep both hands on the handlebars and one foot on the footboard.
• Push off with your other foot.
• Brake gradually – use the rear brake.
• Turn the handlebars and lean your body slightly in that direction.
• Fold the footrest before setting off.
• Only ride on designated routes.
• Maintain a smooth ride.
• Be especially careful around pedestrians.

After finishing your ride

• Park the scooter in the designated area (see photos).
• Make sure that it does not pose a hazard and is secure.

Photo 2. Parking space at Office Building No. 4 Photo 3. Parking space at the Main Building.

What is NOT ALLOWED?

• Transport people or luggage,
• Ride with two people,
• Ride on wet surfaces, sand, leaves, in the dark,
• Ride a faulty scooter,
• Modify the scooter,
• Leaving scooters in prohibited areas (emergency routes, intersections, etc.),
• Touching hot parts after braking. 

Breakdown or accident?

• Immediately secure the faulty device against use,
• Report faults to the Technical/Administration Department,
• If there has been an accident or breakdown, report it immediately to your supervisor.
• In the event of an accident, immediately administer first aid to the injured person and, if necessary, call the emergency services.