Before you start work, remember that you must:
- Complete health and safety training and on-the-job training,
- Have no health contraindications to performing the work.
- Be familiar with the operating instructions for the machines and equipment used at your workplace.
- Be at least 18 years of age.
Before starting work:
- Familiarize yourself with the equipment documentation.
- Check the location of the emergency switches.
- Check the condition of the device: casing, covers, screws (make sure they are not loose).
- Make sure that the power cord is not damaged.
- Before performing maintenance, disconnect the device from the power supply.
During operation:
- Follow the instructions and safe working methods.
- Keep your workstation tidy.
- Disconnect the device from the power supply during: adjustments, maintenance, replacement of components.
- Protect the power cord from overheating, oil contamination, and sharp edges.
- Do not overload the device.
- Secure loose clothing items to prevent them from being caught in moving parts.
Operating the device
- Turn on the device using the main switch.
- Set the speed and direction of rotation with the potentiometer.
- Insert the belt into the winder, pass it through the guide, and close it.
- Check that the belt is properly secured and in good condition.
- When winding, be careful with the hook end of the belt—it may hit you when you finish winding.
- The winder will stop automatically when it detects the end of the belt.
- Open the guide and remove the wound belt.
What should you NOT do?
- allow unauthorized persons to operate the machine,
- perform repairs or modifications yourself,
- perform maintenance while the device is in operation.
Malfunction or accident?
- If something breaks down, turn off the device, secure it against restarting, and report the fault to your supervisor.
- If an accident has occurred, do not touch anything and inform your supervisor.
- In the event of an accident, immediately administer first aid to the injured person and call the emergency services if necessary.
- Hang a sign on the damaged device: "DEVICE UNDER REPAIR – DO NOT USE."
