Get ready for work—you must wear:

• A work shirt and pants,
• Work shoes with composite toe caps,
• Work gloves.

Before you start work, remember that you must:

• Complete health and safety training and on-the-job training.
• Have no health contraindications to performing the work.
• Be familiar with the operating instructions for the machines and equipment used at your workplace. 

Before starting work:

• Visually check the technical condition of the electrical installation of the device.
• Visually check the technical condition of the oil hose connections.
• Make sure that the mechanisms are undamaged and engaged.
• Before working under the vehicle, make sure that the locks are activated.
• Before leaving the car, make sure that no one is underneath it. 

During work:

• If you find any damage, stop working and report it to your supervisor. 
• Take care of the technical condition of the lift. 
• Secure loose items of clothing to prevent them from getting caught. 
• Do not move away from the control panel while the lift is in motion. 
• When the lift is in operation, ensure your own safety and that of others (keep a safe distance).
• After lifting the car, turn off the lift and secure the switch with a padlock to protect it from unauthorized persons. 
• Follow the information on the plate to ensure safety.

After finishing work:

• Clean the lift. 
• Tidy up the work area. 
• Before cleaning the jack, disconnect it from the power supply.
• Lower the lift to its lowest position.
• Make sure that the device does not pose any danger to the surroundings. 

What should NOT be done?

• Allow unauthorized persons to work with the device.
• Leave the workplace while the lift is in operation.
• Affect the stability of a vehicle on a raised lift. 
•  Lift one end, one corner, or one side of the vehicle.
• Modify or repair the lift and equipment yourself. 
• Use the lift contrary to its intended purpose. 

Breakdown or accident?

• If something breaks, stop using the equipment and report the fault to your supervisor.
• If an accident has occurred, do not move anything and inform your supervisor.
• Hang a sign saying "OUT OF SERVICE" on the damaged workstation.
• In the event of an accident, immediately administer first aid to the injured person and, if necessary, call the emergency services.