Get ready for work—you must wear:

• A work shirt and pants,
• Work shoes with composite toe caps,
• A reflective vest,
• Cut-resistant work gloves,
• Safety glasses, 
• Hearing protection, 
• Face shield,
• Dust mask.

Before you start work, you must:

• Complete health and safety training and on-the-job training.
• Have no health contraindications to performing the work.
• Be familiar with the operating instructions for the machines and equipment used at your workplace.

Before starting work:

• Visually assess the technical condition of the equipment.
• Check that all parts of the equipment are working properly. 
• Check the condition of the extension cords powering the equipment. 
• Make sure that starting the equipment does not pose a risk of accident.

During operation:

• Follow safe working practices in accordance with the instructions and recommendations.
• Maintain the technical efficiency of power tools.
• Do not use the devices in rain or damp conditions.
• Ensure good lighting. 
• When replacing items such as drill bits or discs, always disconnect the device from the power supply.
• Secure loose clothing and accessories so that they do not pose a hazard during work. 
• Wear safety glasses and a protective mask when working.
• Do not carry the device by the cord; disconnect it by holding the plug.
• Protect the cord from overheating, oil, and damage.
• Keep your work area tidy.

After finishing work:

• Turn off the device. 
• Clean the work area and the device, then put them back in their place. 
• Make sure that the work area and tools you leave behind do not pose a hazard to the environment. 

What should you NOT do?

• Perform fire-hazardous work in rooms where painting or other work involving flammable substances was carried out on the same day.
• Allow unauthorized persons to work. 
• Repair tools by unauthorized persons. 
• Leave the workplace while the equipment is in operation. 
• Use damaged tools or use them for purposes other than those for which they are intended. 

Breakdown or accident?

•  If something breaks, put the damaged tool aside and report the malfunction to your supervisor.
• If an accident has occurred, do not touch anything and inform your supervisor.
• Hang a sign on the damaged tool saying: "DEVICE DAMAGED - DO NOT TURN ON."
• In the event of an accident, immediately administer first aid to the injured person and call the emergency services if necessary.