Get ready for work—you must wear:

• a work shirt and pants,
• work shoes with composite toe caps,
• work gloves,
• a safety helmet,
• safety harness, 
• shock-absorbing rope.

Before you start work, you must:

• complete health and safety and fire safety training and on-the-job training,
• have no health contraindications to performing the work,
• be familiar with the operating instructions for the machines and equipment used at your workplace.

Before starting work:

• check the technical condition of the equipment, maintenance, and nameplates,
• check the operation of the safety buttons (STOP, main switch),
• make sure that all plugs are disconnected before moving the platform,
• remove obstacles from the work area,
• check the maximum load capacity:
  • 10 kg on the rear shelf,
  • 120 kg on the platform (approx. 80 kg person + 40 kg equipment),
  • load only when the platform is lowered,
• check clothing and hair for the risk of entanglement,
• at least two people are required for operation (operator + safety person on the ground),
• read the manufacturer's "Operating Instructions" section before use.

During operation:

• follow ergonomic principles when lifting and loading,
• use the device only on hard and level ground,
• observe the permissible inclines specified by the manufacturer,
• be careful when driving with the platform raised,
• check the space above the device (risk of collision and crushing),
• place all loads inside the basket or on the shelf,
• the operator must wear a fall arrest harness.

After finishing work:

• tidy up the workstation,
• if the work has not been completed, secure the area against access by unauthorized persons,
• report to your supervisor that the work has been completed.

What is NOT ALLOWED?

• use a phone, headphones, or listen to music,
• perform repairs or maintenance on a connected machine,
• approach electrical/hydraulic systems with fire or heat sources,
• increase the working height (ladders, scaffolding),
• attach platforms to the building structure,
• use the device as a crane, tow truck, or elevator,
• work in windy conditions or outdoors,
• use the device in a fire zone or explosion hazard zone,
• expose the machine to water, moisture, corrosion, wash with a pressure washer,
• overload platforms or shelves,
• throw small objects onto the chains and mast,
• load horizontal loads while the platform is moving,
• load people or materials onto a raised platform,
• lift overhanging loads,
• use inappropriate harnesses,
• work in loose clothing, with loose hair, or wearing jewelry,
• touch live wires,
• start the machine during maintenance work or when there is a prohibition on starting it.

Malfunction or accident?

• If something breaks down, turn off the device, secure it against restarting, and report the fault to your supervisor.
• If an accident has occurred, do not move anything and inform your supervisor.
• In the event of an accident, immediately administer first aid to the injured person and call the emergency services if necessary. 
• Hang a sign on the damaged device saying: "DEVICE UNDER REPAIR – DO NOT USE."
• During repairs, disconnect the power supply and mark the work area.
• In case of fire, disconnect the device from the power supply.
• In case of danger, immediately press the emergency stop button.