Get ready for work—you must wear:

• a work shirt and pants,
• work shoes with composite toe caps,
• safety glasses,
• protective gloves.

Before you start work, remember that you must:

• Complete health and safety training and on-the-job training.
• Have no health contraindications to performing the work.
• Be familiar with the operating instructions for the machines and equipment used at your workplace. 

Before starting work: 

• Check that the equipment is correctly installed and that the safety switch is working.
• Tidy up the area around the machines so that there is at least 60 cm of free space around the machine. 
• Follow the instructions and procedures. 
• Verify that the film roll is correctly installed. 

During operation:

• During operation, if the pillows are not sealed properly, adjust using the "+/-" buttons.
• If the film roll runs out, stop the machine, replace the roll, and switch it back to automatic mode. 

After finishing work:

• Turn off the machine. 
• Clean up the work area. 

What NOT to do?

• Allow unauthorized persons to operate the machine.
• Work with damaged equipment.
• Modify or repair the equipment yourself. 
• Use the equipment for purposes other than those for which it is intended.
• Paint over or remove safety labels. 

Malfunction or accident?

• If something breaks, stop using the device and report the fault to your supervisor.
• If an accident has occurred, do not touch anything and inform your supervisor.
• Hang a sign saying "OUT OF SERVICE" on the damaged workstation.
• In the event of an accident, immediately administer first aid to the injured person and call the emergency services if necessary.