Get ready for work—you must wear: 

• a work shirt and pants,
• work shoes with composite toe caps,
• safety glasses,
• work gloves.

Before you start work, you must:

• Complete health and safety training and on-the-job training.
• Have no health contraindications to performing the work.
• Be familiar with the operating instructions for the machines and equipment used at your workplace.

Before starting work: 

• Check the technical condition of the equipment.
• Check the operation of the main and emergency switches. 
• Make sure that all guards are in place. 
• Lubricate the rubber ring inside the handle. 
• Run the balancing machine on a trial basis and check that the direction of rotation is correct. 

During operation:

• Clean the wheel before mounting it on the machine. 
• After mounting the wheel, check that it is correctly installed. 
• Work carefully with the control elements. 
• Be careful, especially when the machine is in operation. 
• Use only serviceable tools in accordance with their intended purpose. 
• Follow lifting standards when moving materials. 
• Use auxiliary equipment for heavier materials. 
• Keep your workplace tidy.

After finishing work:  

• Tidy up your workstation. 
• Turn off the machine. 
• Remove stubborn stains using mild cleaning agents. 

What should NOT be done?

• Have repairs carried out by unauthorized persons.
• Remove safety guards. 
• Operate material handling equipment without authorization. 
• Leave the device unattended. 
• Modify the electrical system. 
• Clean the balancing machine with compressed air. 

Failure or accident?

• If something breaks down, turn off the device, secure it against restarting, and report the fault to your supervisor.
• If an accident has occurred, do not touch anything and inform your supervisor.
• Hang a sign on the damaged device: "DEVICE UNDER REPAIR – DO NOT USE."